The D6Smart incl Steel Rack is a simple entry-level kit ideal for light industrial gates you wish to automate.
The D6Smart incl Steel Rack includes the following:
1) D6Smart Operator (NO BASEPLATE) – Retro Plate available at extra cost
2) DX Smart Controller
3) 24VDC SMART Charger – Requires 220VAC Supply
4) 24V 28W Battery
5) 4M Steel Rack(2x 2M Length)
6) 2x 4-Button Nova Remotes
Technical Specifications:
Input Voltage 90V – 240V AC 50/60Hz
Current Consumption (Mains) 200mA peak
Charger Output Current 1.3A @ 24V +/- 5% (28W)
Maximum Daily Operations 150
Duty Cycle with Mains Present 50%
Motor Supply Battery-driven (Standard Capacity – 2x12V)
Current consumption (motor at rated load) 13A
Main Controller Fuse Serviceable | 35A
Auxiliary Supply Resettable Fuse | 12V 3A MAX (10sec Pulse)
Charger (Mains Supply) Non-serviceable | 3A slow-blow
Motor push force – starting 30kgf
Motor push force – rated 17kgf
Maximum Gate Mass 600kg
Gate speed (varies with load) Maximum Up to 35m/min Rated 29m/min
Manual Override Lockable with key release
Operations whilst in Battery backup mode 7.2Ah Battery Up to 35m/min 17kgf|Up to 29m/min 30kgf
Half day 209| 102
Full day 183| 79
Collision Sensing Electronic
Operating Temperature Range -15°C to +50°C
On-Board Receiver Type Code-hopping multichannel receiver with selective add and delete
Receiver Storage code Capacity 1500 remotes
Receiver Frequency 433.92MHz
Degree of Protection IP55
Despite the specifications, the D6Smart incl Steel Rack Kit, also offers the following Features:
(a) Mobile Monitoring, Operation and Software update using MyCentsys Remote application
(b) Built-in Anti-theft configurable alarm using the dedicated siren
(c) Intrusion configurable alarm using the dedicated siren and compatible beam system
(d) Can be Solarised
(e) Adjustable & configurable operating speeds to meet the required expectations
(f) Battery capacity expansion for longer time-frames when no mains is present – using the certified pack
The following ancillaries can also be installed:
i. Solar Supply – Using Centurion Solar Equipment
ii. Photon Smart Beams – AutoClose Functionality
iii. G-Speak/G-Speak Ultra – Only the ultra is compatible with a gate station
iv. SmartGuard or SmartGuard Air Keypad
v. Flux Loop Detector for FRX Capabilities
The D6Smart incl Steel Rack kit is for home use, or light industrial applications, and should only be installed by a Centurion Systems Certified Installer, or by US. Should another installer be elected, it is important to remember that the corresponding and applicable regulations, By-Laws, SANS standards, including the specifications/terms/conditions of Centurion Systems are taken into account.
For more information on the D6SMART please visit THIS PAGE
IMPORTANT TO NOTE
In terms of insurance regulations, and the manufacturing specifications of Centurion Systems, it is recommended to utilise our Service Plans to ensure the installation remains compliant and up to standard. Failure to adhere to this requirement will result in claim repudiation should you wish to claim for the installation from your insurance in future.
Upon purchase, the operator is governed by a 2-year carry-in warranty which warrants the operator against any factory, product or performance defects from the date of purchase for a period of 24 months. This EXCLUDE user/installer negligence.
LASTLY, the operator is a component of the ECO System developed by Centurion Systems. Visit THIS PAGE to learn more
