The D5EVO Smart incl Nylon Rack is a simple entry-level kit ideal for small light gates you wish to automate at your home.
The D5EVO Smart incl Nylon Rack includes the following:
1) D5EVO Smart Operator (NO BASEPLATE) – Retro Plate available at extra cost
2) DX Smart Controller
3) 12VDC SMART Charger – Requires 220VAC Supply
4) 12V 28W Battery
5) 4M Steel Rack(2x 2M Length)
6) 2x 4-Button Nova Remotes
Technical Specifications:
Input Voltage 110V – 240V AC 50/60Hz
Current Consumption (Mains) 320mA peak
Charger Output Current 1.8A @ 14.3V +/- 5% (28W)
Maximum Daily Operations 150
Duty Cycle with Mains Present 50%
Motor Supply Battery-driven (Standard Capacity – 1x12V)
Current consumption (motor at rated load) 15A
Main Controller Fuse Serviceable | 35A
Auxiliary Supply Resettable Fuse | 12V 600mA MAX (10sec Pulse)
Charger (Mains Supply) Non-serviceable | 3A slow-blow
Motor push force – starting 30kgf
Motor push force – rated 17kgf
Maximum Gate Mass 500kg
Gate speed (varies with load) Maximum Up to 24m/min Rated 19m/min
Manual Override Lockable with key release
Operations whilst in Battery backup mode 7.2Ah Battery Up to 24m/min 7kgf | Up to 18m/min 17kgf
Half day 90 | 44
Full day 70 | 35
Collision Sensing Electronic
Operating Temperature Range -15°C to +50°C
On-Board Receiver Type Code-hopping multichannel receiver with selective add and delete
Receiver Storage code Capacity 1500 remotes
Receiver Frequency 433.92MHz
Degree of Protection IP55
Despite the specifications, the D5EVO Smart incl NYLON Rack Kit, also offers the following Features:
(a) Mobile Monitoring, Operation and Software update using MyCentsys Remote application
(b) Built-in Anti-theft configurable alarm using the dedicated siren
(c) Intrusion configurable alarm using the dedicated siren and compatible beam system
(d) Can be Solarised
(e) Adjustable & configurable operating speeds to meet the required expectatins
(f) Battery capacity expansion for longer time-frames when no mains is present – using the certified pack
The following ancillaries can also be installed:
i. Solar Supply – Using Centurion Solar Equipment
ii. Photon Smart Beams – AutoClose Functionality
iii. G-Speak/G-Speak Ultra – Only the ultra is compatible with a gate station
iv. SmartGuard or SmartGuard Air Keypad
v. Flux Loop Detector for FRX Capabilities
The D5EVO Smart incl Nylon Rack kit is for HOME USE ONLY, and should only be installed by a Centurion Systems Certified Installer, or by US. Should another installer be elected, it is important to remember that the corresponding and applicable regulations, By-Laws, SANS standards, including the specifications/terms/conditions of Centurion Systems are taken into account.
For more information on the D5EVO SMART please visit THIS PAGE
IMPORTANT TO NOTE
In terms of insurance regulations, and the manufacturing specifications of Centurion Systems, it is recommended to utilise our Service Plans to ensure the installation remains compliant and up to standard. Failure to adhere to this requirement will result in claim repudiation should you wish to claim for the installation from your insurance in future.
Upon purchase, the operator is governed by a 2-year carry-in warranty which warrants the operator against any factory, product or performance defects from the date of purchase for a period of 24 months. This EXCLUDE user/installer negligence.
LASTLY, the operator is a component of the ECO System developed by Centurion Systems. Visit THIS PAGE to learn more
